System information
Item Description
Nordic PPM The Nordic peak program meter is a Type I meter and is displayed
with a scale of –42 dB to +12 dB, which corresponds to -42 dBu to 12
dBu. 0 dB on the Nordic PPM equals 0 dBu.
Show Labels Toggles the meter level labels on and off.
Show Peaks Toggles peak level indicators on the top of the meter.
Hold Peaks When selected, the highest peak levels are represented by a thin line
on the meter.
Hold Valleys When selected, the lowest peak levels are represented by a thin line
on the meter.
Vintage Mode When Vintage Mode is selected, the VU meters use a different
calculation method to simulate the response of analog VU meters.
Monitoring output levels with peak meters
When the Meters control region is visible, each assignable effects chain displays meters you can use to
monitor output levels.
To show or hide the Meters control region, click the Meters button in the View Controls pane.
If the Meters control region is not visible, peak meters are displayed in the Faders control region.
Right-click the meter and choose a setting from the shortcut menu (or hover over the meter and roll your
mouse wheel) to change the resolution and display options.
Right-click the peak meters and choose Show Peak Meter to show or hide meters for individual
channels.
Muting or soloing an assignable effects chain
When the Faders control region is visible, each assignable effects chain displays Mute and Solo
buttons.
To show or hide the Faders control region, click the Faders button in the View Controls pane.
380CHAPTER 15