System information
n Use an input bus as a return for hardware-based effects.
n Use an input bus to monitor a source such as a talkback microphone.
Adding or Deleting Input Busses
From the Insert menu, choose Input Bus (or click the Insert Input Bus button in the Mixing Console
toolbar) to add an input bus to your project.
You can add up to 26 input busses, and you can change the number of busses at any time.
Adding a bus
From the Insert menu, choose Input Bus. An input bus channel strip is added to the Mixing Console
window. For more information, see "Input Bus Channel Strips" on page 369.
If the Mixing Console window is visible, click Insert Input Bus button in the toolbar. For more
information, see "The Mixing Console Window" on page 51.
Renaming a bus
To rename a bus, double-click the label at the bottom of the channel strip and type a new name in the box
(or press F2 to rename the selected bus). The channel strip in the Mixing Console is updated when you press
Enter:
Delete all characters in a custom bus name to reset a custom bus name to its default.
Deleting a bus
Right-click an input bus channel strip in the Mixing Console window and choose Delete from the shortcut
menu, or select an input bus channel strip and press the Delete key.
MIXING AUDIO339