System information
1. Add your media to the timeline using Add Across Tracks mode so the video for the left and right
eyes is on separate tracks. In the following example, the left-eye track is above the right-eye track.
2. Use one of the following methods to align the audio and video so the video output is synchronized.
n If you used a slate or a loud clap for your synchronization point, you can align the events to
within a frame of each other using the audio waveforms:
a. Roughly align the audio waveforms by dragging events in the timeline.
b. Use the Zoom controls at the bottom-right corner of the timeline to zoom in on the
waveform. For more information, see "Zooming and magnification" on page 188.
c. Verify Quantize to Frames is enabled because you want video frames to be aligned
even if the audio is slightly out of alignment.
d. Drag a track's border to make the tracks taller and view large waveforms.
e. Use Shift+Up Arrow to magnify the waveforms if necessary.
f. Click the event you want to move and press 1 or 3 on the numeric keypad to nudge
the event by frames to the left or right.
n Synchronizing a video event:
These steps require snapping to be enabled, so if you have not already done so, turn
snapping on by clicking the Enable Snapping button . For more information, see
"Enable Snapping" on page 139.
208CHAPTER 8