Technical data

ManualsBrandsMUTEC ManualsAudioMC-6

Operation

1) Which operation mode is basically needed?

→

»MODE«

Should my MC-3+ work as clock generator (»INTERNAL«), as clock distributor (»EXTERNAL«) or as audio

signal re-clocker (»RE-CLOCK«)?

2) Which reference do I need for my clocking application?

→

»REFERENCE«

3) Do I need different clock rates at the same time?

→

»CLOCK

MULTIPLIERS«

After these general decisions are made, your MC-3+ is conﬁgured for optimal operation in your set-up. Due to the fact that the

system monitors for useful function combinations, maloperation is not possible.

So, let‘s have a look to the individual functions.

Selecting Modes

This setting example shows the MC-3+ locked to its internal ultra-low jitter clock base generating output clocks of 44.1 kHz at

any available output. This is the factory default setting.

MODE

RE-CLOCK

EXTERNAL

INTERNAL

REFERENCE

S/P-DIF op

S/P-DIF co

88.2

48.0

44.1

32.0

192.0

96.0

176.4

10.0M

WCLK

INTERNAL + 10.0M

AES3/11

x 256

x 4

x 2

x 1

CLOCK MULTIPLIERS

1 5432