Manualshelf

User manual

ManualsBrandsMutec ManualsDigital ConvertersFormat converterThe MC-1.1 + is a signal converter that easily converts between the usual AES3 and S / P-DIF digital audio formats
12345678910
CONTENT
INTRODUCTION
General Function Description . . . . . . . . . . . . . . . . . 7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Peripheral MUTEC Products
. . . . . . . . . . . . . . . . . . 8
CONTROL ELEMENTS AND TERMINALS
MC-1.1+ Front Panel . . . . . . . . . . . . . . . . . . . . . . 9
MC-1.1+ Rear Panel . . . . . . . . . . . . . . . . . . . . . . . 9
INSTALLATION
Content of the Box . . . . . . . . . . . . . . . . . . . . . . . 11
Placing the device . . . . . . . . . . . . . . . . . . . . . . . 11
Wiring the AES/EBU, AES/EBUid and S/P-DIF Interfaces . . . 11
OPERATION
Selecting Function Menus and setting Functions . . . . . . 13
Steps of Operation . . . . . . . . . . . . . . . . . . . . . . . 13
OPERATING THE MC-6
MODE + AUDIO IN
+
SCMS Menus . . . . . . . . . . . . . . . 15
General Operation Procedure
. . . . . . . . . . . . . . . . . 15
Unidirectional Format Conversions . . . . . . . . . . . . . . 16
Unidirectional Format and Sampling Rate Conversions
. . . 16
Signal Splitting Mode . . . . . . . . . . . . . . . . . . . . . 17
SCMS Functions . . . . . . . . . . . . . . . . . . . . . . . . . 18
STATUS Area
. . . . . . . . . . . . . . . . . . . . . . . . . . 18
APPENDIX
Pin Assignment of the Connectors . . . . . . . . . . . . . . 19
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . 20