Operating instructions

146
Dolby Pro Logic
II
x (Pro Logic
II
) mode
1
Select the Dolby Pro Logic IIx mode using the STANDARD
button.
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the respective components.
1 3,66
4,5
4, 5
6
1
3, 6
The Dolby Surround Pro
Logic IIx Cinema or Music
mode can be chosen directly
by pressing the CINEMA or
MUSIC button on the
Remote control unit during
playback in the Dolby Pro
Logic IIx mode.
To p lay in the PLIIx mode, set “Sp.Back” at the Speaker Configuration setting to “1spkr” or “2spkrs”.
To p lay in the PLIIx mode, set “Surround Back” at the Power Amp Assign setting.
(Main unit) (Remote control unit)
• The Dolby Pro Logic indicator lights.
Light
3
Display the Surround Parameter menu.
MODE: PL x C
*Surr Parameter
(Main unit) (Remote control unit)
(Pro Logic II Cinema mode)
(Pro Logic
II Music mode) (Pro Logic II Game mode) (Dolby Pro Logic mode)
MODE: PL G
*Surr Parameter
MODE: PL C
*Surr Parameter
MODE: PL M
*Surr Parameter
*Surr Parameter
MODE: DOLBY PL
Display
• When the “SB CH OUT” parameter is set to “ON”.(Set “SP.Back” at the System Setup to “1spkr” or “2spkrs”).
MODE: PL x C
*Surr Parameter
MODE: PL x M
*Surr Parameter
(Pro Logic IIx Cinema mode) (Pro Logic IIx Music mode)
MODE: PL x G
*Surr Parameter
(Pro Logic IIx Game mode)
Display
• When the “SB CH OUT” parameter is set to “OFF”.(Set “SP.Back” at the System Setup to “None”).
4
Select the play mode.
NOTE:
• The PLIIx mode is set when the “SB CH OUT” surround parameter is set to “ON”, and
the PLII mode is set when this parameter is set to “OFF”.
(Main unit) (Remote control unit)
• The mode switches as shown below each time the
STANDARD button is pressed.
DTS NEO:6DOLBY PLIIx