PT NL ES IT FR DE EN
Specifications Image Sensor 3.1M CCD color sensor Resolution Internal Memory External Memory Fine: 2272 x 1704 (H/W enhancement); High: 2048 x 1536 ; Low: 1024 x 768 16MB Flash SD/MMC card slot Interface USB/Video out Flash Mode Auto/Red-eye/On/Off File Format JPEG/DCF/AVI Self-timer 10-second delay Shutter Range 1/15~1/2500 sec. Lens Fixed, f=6.7mm (45mm for 135 camera) Aperture Ratio F5.6 Digital Zoom 2X/4X View Finder Yes LCD Display 1.5" TFT LCD Power 2 x 1.
USB Device Unplugging Notice: If you want to unplug the camera from your computer, be sure to stop the device before hand. To stop the camera, follow the steps below: Remove from PC: 1. Click on the device icon located on the taskbar. Select the device you want to stop (e.g. ‘Stop USB Mass Storage Device - Drive(E:)). 2. Follow the on-screen instrustions to safely remove the camera. Remove from Mac: 1. Select the camera icon (shown as ‘NO_NAME’ or ‘untitled’ drive) on the desktop. 2.
Table of Contents Identifying the Parts Preparation ....................................................................................... 2 Loading Batteries ......................................................................... 2 Attaching the Strap ....................................................................... 3 Inserting the SD/MMC Card ......................................................... 3 Camera Settings Record Mode ...................................................................
Modes and Functions ....................................................................... 9 For PC ............................................................................................... 9 Driver Installation .......................................................................... 9 Getting Connected to the Computer ............................................ 10 For MAC ............................................................................................
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Power button Shutter button Self-timer LED Flash Photo Sensor Viewfinder Speaker Video port USB port Macro select dial Lens Mode button LCD On/Off LCD display Menu/Left/Exit button Resolution/Up button Flash/Right/Multiimage button 18. Self-timer/Down button 19.
20. 21. 22. 23. 24. 25. 26. 27. 28.
EN Attaching the Strap “Insert the thin end of the strap into the strap holder” “Pass the other end of the strap through the loop of thin cord and pull tight” Inserting the SD/MMC Card (not supplied) “Open the card slot cover” “Insert the card as shown above” Digital Camera User Guide 3
Camera Settings Record Mode Press the below buttons to select your desired settings. When a setting is selected, it will be recorded immediately. Resolution Button button to circle Press the through the settings. Flash Button Press the button to circle through the settings. FINE OFF HIGH ON LOW AUTO VIDEO RED-EYE VOICE RECORD Menu Button Self-Timer Button button to circle Press the through the settings. Self-timer on Self-timer off 4 Press the button to enter OSD menu.
QUICK REVIEW: OFFÆON EXPOSURE: AUTOÆ+1Æ+0.5Æ-0.5Æ-1 WHITE BALANCE: AUTOÆ AUTO SHUTDOWN: 1MinÆ2MinÆ5Min INFORMATION: ONÆOFF EN ZOOM: 1XÆ2XÆ4X VIDEO OUT: NTSCÆPAL DATE: MM/DD/YY DAYLIGHTÆ CLOUDYÆ FLUORESCENTÆ TUNGSTEN LONG EXPOSURE: OFFÆ1XÆ2XÆ3XÆ4X SOUND: ONÆOFF TIME: HH/MM/SS RESTORE SETTING: NOÆYES Playback Mode Menu Button Press the select or button to enter OSD menu. Use the / buttons to button to change or button to exit menu.
Taking Pictures How to take pictures and short movies? To take pictures, do the following: 1 . Power on the camera and make sure it is in the Record mode. 2 . Position the subject in the viewfinder. * You can also frame or preview images on the LCD display while it’s powered-on. 3 . Press the Shutter button. To make short movies, do the following: 1 . Power on the camera and the LCD display. 2 . Press the Resolution button to select VIDEO. 3 . Press the Shutter button to start recording.
/ buttons to review your pictures. button. To playback short movies, do the following: On the LCD display 1 . Power on the camera. 2 . Set the camera to Playback mode. 3 . Select the picture marked with a Shutter button to play. icon and then press the On a TV 1 . Power on the camera and the LCD display. 2 . Select NTSC or PAL from the OSD menu. 3 . Connect one end of the Video cable into the VIDEO port of your camera and the other end into the VIDEO IN port of the television. 4 . Turn on the TV.
How to delete pictures and short movies? Sometimes you may need to delete pictures or videos to make room for new recordings. To delete them, do the following: 1 . Power on the camera. 2 . Set the camera to Playback mode. 3 . Press the to delete. / buttons to select the picture/video you want 4 . Press the Menu button, the OSD menu appears. 5 . Select to delete the current picture or select to delete all. How to record voice messages? This camera could be your digital voice recorder, too.
EN Connecting to a Computer Modes and Functions Record Mode Press button Playback Mode Without USB connection Power On Mass Storage Mode (USB Portable Disk Mode)/ Console Press button PC Camera Mode With USB connection Digital Camera User Guide 9
For PC Driver Installation 1 . Insert the installation CD into your CD-ROM drive. 2 . Follow the on-screen instructions to complete the driver installation and the included software. Getting Connected to a Computer 1 . Connect one end of the USB cable into the USB port of your computer and the other end into your camera. 2 . Power on the camera. For MAC (Mac OS 9.x and 10.1 above) By connecting your camera to a MAC computer (refer to Getting Connected to a Computer ), it turns to Mass Storage Mode.
EN Transferring Camera Data Using Console (Not available for MAC) By connecting your camera to a computer, the Console opens. Meanwhile your camera switches to Mass Storage Mode, too. You may choose either to transfer the camera data through Console program or through Mass Storage Mode.
Mass Storage Mode (USB Portable Disk) Connect your camera to a computer, an Portable Disk) will appear. Your camera Mode. In this mode, you can copy, move exactly the way you manipulate files in extra disk drive (USB is now in Mass Storage or delete files (pictures) Windows user interface. NOTE: Please do not copy any files into the DCIM folder of your camera. Otherwise it may cause camera unstable or crash.
