Operation Manual

18
SCAN OPERATIONS

The “Scanning in progress” bar will appear showing the scan
status.
8.
Press
the (Exit) button to close the Scan Setting window, the
scanned image(s) will then be imported in the program.
Useful Scanner Features
Use following features when scanning special types of paper.
Scanning Business Cards
1.
Place a stack of business cards in the ADF.

Refer to the “Placing Original(s)” section for the ADF.
2.
Press the PANEL button on the scanner to launch the iDocScan
Settings or click the icon in the taskbar to open the “Button
Settings” window.
3.
Select the respective Scan Source as your original(s) to be placed.

Select “ADF (Simplex)” for scanning single-sided cards, or “ADF
(Duplex)” for scanning double-sided cards.
4.
Select the “Name Card” from the Scan Size
dropdown list.
5.
Press the Scan Button to start scanning.

The “Scanning in progress” bar will appear
showing the scan status. After the scan is
complete, the images will be saved in the
default file location with automatically
generated filename.
6.
Press the (Exit) button to return to the
iDocScan D50 main window , and the scanned
image(s) will be displayed as thumbnails.
Load a maximum of 20 business cards in a stack in the ADF. If the
stack of cards cannot be fed properly, try to reduce the number of
cards in the stack.
Scanning Long Paper
1.
Place your long paper in the ADF.

Refer to the “Placing Original(s)” section for the ADF.
2.
Press the PANEL button on the scanner to launch the iDocScan
Settings or click the
icon in the taskbar to
open the “Button Settings” window.
3.
Select the respective Scan Source as your
original(s) to be placed.

Select “ADF (Simplex)” for scanning single-
sided long paper, or “ADF (Duplex)” for
scanning double-sided long paper.
4.
Select the “Long Sheet” from the Scan Size
dropdown list.
5.
Press the Scan Button to start scanning.

The “Scanning in progress” bar will appear showing the scan
status. After the scan is complete, the images will be saved in
the default file location with automatically generated filename.
6.
Press the (Exit) button to return to the iDocScan D50 main
window , and the scanned image(s) will be displayed as thumbnails.
By default, the scanner can accept the long paper up to maximum
635mm in length. The bottom of the scanned image will be cut off if
longer than 635mm. Please verify your original before scanning.