Operation Manual

15
SCAN OPERATIONS
Scan Mode
Select a mode for scanning your original(s).
Choices: “Color”, “Gray”, “B&W”.
Resolution
Choices : 100dpi, 200dpi, 300dpi, 600dpi, 1200dpi.
NOTE: “1200dpi” is available only when scanning from
the Flatbed.
Scan Size
Choices: “Auto”, “A4”, “A5”, “B5”, “Letter”, “Name
Card”, “Long Sheet”.
NOTE: “Name Card” and “Long Sheet” are available
only when scanning from the ADF.
NOTE: Options of the Scan Size may vary based on the
Resolution is set.

Choose “Auto” to let the scanner automatically
detect the size of your original.

Choose “Name Card” when scanning business
cards in a batch up to 20 cards.

Choose “Long Sheet” when scanning long paper
up to 635mm in length.
File Type
Choices: JPEG(*.jpg), BMP (*.bmp), TIFF(*.tif), Multi-
TIFF(*.tif).
NOTE: Image can be saved as JPG at 600 dpi/Color
and 1200 dpi/Color only when scanning from the ADF.
NOTE: Choose Multi-TIFF when scanning multi-page
originals into a single TIFF by using the ADF only. Do
not attempt to create a multi-page TIFF file that exceed
2GB, otherwise no multi-page TIFF will be created.
Advanced Setting for ADF
Deskew
Image skew generally occurs when the original is
placed incorrectly in the ADF tray.
Tick the checkbox to automatically straighten skewed
pages as much as possible to maintain it’s original
size.
NOTE: Deskew is only enabled when the Scan Size set
to “Auto”.
Blank Page
Removal
Tick the checkbox to automatically remove the blank
page(s) from the scanned document(s). For example,
when scanning a stack of documents containing both
double-sided and single-sided documents.
This function works best with white or light-colored
pages.
Depending on the originals, some pages that are
not blank may be detected as blank due to a small amount
of text.
Stop
Scanning
After Multi-
Feed
A multi-feed occurs when two or more sheets fed in
the ADF at the same time. This scanner includes an
ultrasonic sensor which can be used to detect the
multi-feed. By using this function, the scanner will
automatically stop when it detects a multi-feed. Tick the
checkbox to enable the multi-feed detection function,
untick it and the scanner will ignore multifeeds even
when they occur.