Operation Manual

14
SCAN OPERATIONS

Select “Flatbed”, “ADF (Simplex)”, or “ADF (Duplex)” in the
Scan Source dropdown list.
3.
Press the SCAN Button.

The “Scanning in progress” bar will appear showing the scan
status. After the scan is complete, the image will be saved in the
specified location with automatically generated filename.
Hotkey scanning with the PDF Button:
1.
Place the original(s).

Refer to the “Placing Original(s)” section for the ADF or the
flatbed.
2.
Select the respective Scan Source as your original(s) to be placed.

Select “Flatbed”, “ADF (Simplex)”, or “ADF (Duplex)” in the
Scan Source dropdown list.
3.
Press the PDF Button on the scanner.

The “Scanning in progress” bar will appear showing the scan
status. After the scan is complete, the PDF file will be saved in
the specified location with automatically generated filename.
Scanning with iDocScan Program
The iDocScan D50 program is specially designed to work with this
scanner for easy scanning and other functions.
Setting Up the Scan Settings
Before you begin scanning, make sure you have set up the scan settings
properly.
1.
Press the PANEL button on the scanner, or press Start > All
Programs > iDocScan D50 > iDocScan D50 to launch the iDocScan
D50 program.
PANEL Button
2.
Press the
(Scan) tab to launch the Scan Setting window for
changing the settings.
Scan Tab
Scan
Settings
Window
Preview
Window
Marquee
Handles
Exit
Preview
Scan
Scan Settings
Properties Description
Scan Source
Choices: “Flatbed”, “ADF (Simplex)”, “ADF (Duplex)”.

ADF (Simplex): Choose when scanning multi-page
single-sided documents fed in the ADF.

ADF (Duplex): Choose when scanning multi-page
double-sided documents fed in the ADF.

Flatbed: Choose when scanning single-page
document placed on the flatbed glass.