Operation Manual

13
PDF Settings
Searchable
PDF
Check the checkbox to convert document into a text-
searchable PDF file.
NOTE: Choose PDF when you need to scan multi-page
documents and convert it to a single PDF file.
OCR Language Choose a language for text recognition.
Advanced Settings
Deskew
Image skew generally occurs when the original is
placed incorrectly in the ADF tray.
Tick the checkbox to automatically straighten skewed
pages as much as possible to maintain it’s original
size.
NOTE: Deskew is only enabled when the Scan Size set
to “Auto”.
Blank Page
Removal
Tick the checkbox to automatically remove the blank
page(s) from the scanned document(s). For example,
when scanning a stack of documents containing both
double-sided and single-sided documents.
This function works best with white or light-colored
pages.
Depending on the originals, some pages that
are not blank may be detected as blank due to a small
amount of text.
SCAN OPERATIONS
Starting Hotkey Scanning
You can perform Hotkey scanning using either the SCAN or PDF Button
on the Operation Panel of the scanner,
PDF Button
Scan Button
or click the
icon in the taskbar to open the “Button Settings” window.
PDF Button
Scan Button
Hotkey scanning with the SCAN Button:
1.
Place the original(s).

Refer to the “Placing Original(s)” section for the ADF or the
flatbed.
2.
Select the respective Scan Source as your original(s) to be placed.

Select “Flatbed”, “ADF (Simplex)”, or “ADF (Duplex)” in the
Scan Source dropdown list.
3.
Press the SCAN Button.

The “Scanning in progress” bar will appear showing the scan
status. After the scan is complete, the image will be saved in the
specified location with automatically generated filename.