82-147-00050 Multi-Functional Digital Camera English Español User Guide
SPECIFICATIONS Image Sensor Resolution 3.1M CMOS sensor Fine: 2688 x 2016 (H/W enhancement); High: 2048 x 1536 ; Standard: 1024x768 Internal Memory 16MB Flash External Memory SD/MMC card slot Interface USB/TV out Flashlight Photo detector, IGBT type; On/Auto/ Red-eye/Off File Format JPEG/AVI/WAV Video Frame Rate(PC Cam) 20~30 fps (320 x240) Self-timer 10-second delay Shutter Speed 1/15~1/2500 sec. Lens Fixed(6G glass lens), f=9mm Focus Range 25cm~35cm(macro),70cm~infinity(normal) Aperture Ratio F3.
English Multi-Functional Digital Camera User Guide
ii | English Digital Camera User Guide Table of Contents Identifying the Parts .............................................................. 1 LCD Display Icons .................................................................. 2 Preparation ......................................................................... 2 Loading Batteries .............................................................. 2 Inserting the SD/MMC Card .................................................. 3 Attaching the Strap .........
English | 1 Digital Camera User Guide 10 1 2 3 4 5 6 7 8 9 15 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 11 13 14 12 13. 14. 15.
Digital Camera User Guide 2 | English LCD Display Icons 1. 2. 3. 4. 5. 6. 7. 8. 9. Battery Low: the power goes off in few seconds when it starts to blink. Image counter Zoom Date Mark Memory card : The card is locked for writing. Macro/Normal mode Resolution Flash Self-timer PREPARATION Loading Batteries a. Open the battery & SD/MMC card cover b.Insert batteries as shown above c.
Inserting the SD/MMC Card (not supplied) a. Open the battery b.Insert the card as shown above. Push & SD/MMC card the card all the cover way in until it is securely locked. Attaching the Strap a. The small loop goes through the strap holder. c.Close the cover. To remove the card Open the cover, then push in the card to pop it out. b.
Digital Camera User Guide 4 | English Camera Settings Record Mode Turn on the power. Press the below buttons to make settings before taking pictures. Flash Resolution Press the button repeatedly to circle through the settings. High 2048x1536 Standard 1024x768 Video 320x240 AUDIO Fine 2688x2016 Press the button repeatedly to circle through the settings. ON AUTO RED-EYE OFF Zoom Press the button to view a bigger size of the image.
English | 5 EN Digital Camera User Guide Menu Press the button to enter or exit the LCD menu. Press the / buttons to select the item, and press / to change settings. Items Settings Self-timer: OFF Items ON Photo Effect: OFF BLUR NATURE SEPIA (sepia tone) B&W (black & white) Exposure: Auto +1.0 +0.5 -0.5 -1.0 White Balance: AUTO (Daylight) (cloudy) (Fluorescent) (Tungsten) Auto shutdown: OFF 1.5 min.
Digital Camera User Guide 6 | English Record Mode - continued Macro/Normal mode Push the Macro/Normal slide toward when taking close-up pictures at a range of 25 ~ 35 cm. Push toward when taking from any other distance. Playback Mode Menu Press the button to enter or exit the LCD menu. Press the / buttons to select the item, and press to change settings. Items Settings Rotate: YES EXIT Select “YES” to rotate by 90º for each time. The result can be retrieved by using Console.
Taking Pictures Taking a Still Picture 1. Slide the lens cover. 2. Turn on the power, and make sure it is in REC ( ) mode. 3. Position the subject in the LCD display. 4. Press the Shutter button. Taking a Video Repeating step 1 and 2 above. 3. Press the button to select (VIDEO) icon. 4. Press the Shutter button to start recording. To stop recording, press the Shutter again.
Digital Camera User Guide 8 | English Recording Sound Clips 1. Slide the lens cover. 2. Turn on the power, and make sure it is in REC ( ) mode. 3. Press the button to select (AUDIO) icon. 4. Press the Shutter button to start recording. Note: LCD screen will turn off in few seconds for powersaving. Press control button to resume the screen. 5. To stop recording, press the Shutter again. Note: Sound clips can only play on a PC, please refer to page 13.
Playing Pictures Back Playing the Pictures 4 1. Turn on the power. 2. Set the camera to Playback( )mode. 3. Press the / buttons to review your pictures. 4. You can review up to 6 images at a time by pressing button. Playing the Videos Select the picture marked with the icon and then press the Shutter button to play.
Digital Camera User Guide 10 | English Playing videos on TV 1. Connect your camera to a TV at VIDEO IN (yellow) port via the video cable. Note: The sound will not play on TV. 2. Turn on the TV, and select “Video” as TV input. 3. Press the 1 2 button to select settings. settings as 4. Set NTSC or PAL in the same as your TV system. Note: It will take few seconds to test if the camera matches TV system correctly. 5. Set the camera to Playback( )mode. 6. Press Shutter button to play.
English | 11 EN Digital Camera User Guide Deleting Pictures 1. Turn on the power. 2. Set the camera to Playback mode. 3. Press the / buttons to select the picture/video you want to delete. 5 (Menu) button. 4. Press the 5. Select to delete one or select to delete all. 6. Select YES to delete. Select NO not to delete and to exit.
12 | English Installing Software 1. Insert installer CD into the CD-ROM drive. 2. Close the CD-ROM drive. 3. An installer wizard will automatically launch. If the installer wizard does not appear, then; 4. You can click Start in the Windows Taskbar. Then, select Run to continue. 5. Click Browse, and select RUN.exe in your CD-ROM drive. 6. Click Open 7. Click OK 8. Follow the on-screen instructions to complete driver installation and the bundled software.
English | 13 Digital Camera User Guide EN Transfering Files Connecting To PC 1. Connect your camera to a computer via USB cable Windows XP 2. In the Windows (98SE/Me/2000/ XP), your PC will detect the camera after connection. Note: For Windows 98SE users, please install the Installer CD first.
14 | English 3. Click My Computer on the desktop. 4. A removable disk drive appears. Digital Camera User Guide Windows XP 5. Double click on the removable disk. 6. Double click on the DCIM folder. WARNING: Please do not copy any files into the DCIM folder of your camera. Otherwise it may cause the camera unstable or crash. 7. Then, You can drag-and-drop files to your PC. Removing the camera Windows XP 1. Click Safely Remove Hardware ( ) icon in the taskbar. 2.
Windows 2000/Me 1. Click Unplug or Eject Hardware Windows 2000/Me ( ) icon in the taskbar. 2. Select Stop USB Mass Storage Device from the menu (Windows 2000). Select Stop USB Disk from the menu (Windows Me). EN English | 15 Digital Camera User Guide (A) Windows 98SE Windows 98SE 1. In My computer, Right click on the removable disk corresponding to the camera. 2. Select Eject from the menu. For MAC users (Mac OS: 9.x and 10.
Digital Camera User Guide 16 | English Using MAX Console (Not available for MAC) By connecting your camera to a computer, MAX Console opens. You may choose either to transfer the camera data through MAX console or through Mass Storage.
Using As PC Camera (OS: 98SE/Me/2000/XP) 1. Connect your camera to a computer via USB cable. 2. Slide the lens cover. 3. Press / (Mode) button. 4. Start NetMeeting application in Windows. * PC camera mode does not support Mac computers.
