User`s guide
Helpful Hints
.I..
].lssue
._
1
Cause-
~~~
_
__.._
1
No power.
.’
f-1
1
Batteries not loaded correctly.
1,
Camera not
In
View mode.
shutter is depressed.
?
rFlashdoes.not
work,
1. Flash
IS
set to OFF.
z
T
2. USB is connected to the camera.
z
3.
Envtronment
is bright enough.
z
image is too bright
-TExposure(EXP)
setting is
Or too dark
unsurtable.
-
.--_
.
-
1,
Camera is not powered on.
Device
not ready
c
nor
2. USB not connected properly.
ml
ai
Connection failure.
,3.
USB data
transfer,error.
4. Hardware
compattbtltty
problem.
5. Insufficient USB power
i
_
__l_._-.-._~__-.~~~..
.~
$
’
Cannot transfer data.
1 1 Incorrect cable connection.
I
2. Camera is not turned on.
s-
^
-+
__
..--..
j
CF Card error.
01
/
1,
CF Card may not be formatted.
2
m
i?
J
Solution
,
~_.___.___~
1. Re-Install batteries.
2. Replace batteries.
1,
Replace batteries.
2. Turn Power On.
1,
Set camera to View mode.
2. Wait for camera to re-adjust.
3. Delete images in camera’s memory.
4. Wait for flash icon to stop blinking on OSD.
1. Set flash to AUTO in RECORD of OSD.
2. Disconnect the USB cable.
3. Continue capturing images.
1.
Adjust EXP(exposure) setting while capturing
images with up/down arrows Or change EXP
setting in RECORD category of OSD.
1. Power on the camera.
2. Ensure USE cable is connected.
3. Unplug and reconnect the USB cable.
4. Contact your computer vendor for help.
5. Ensure USB connects directly to computer
host port, NOT keyboard or other port.
1,
Reconnect the cables.
2. Turn on the camera.
1,
Format card through the OSD function.
Note: You will delete all data on the CF Card if
you reformat your CF Card.
__~
GSmart
350
Digitale
Kamera
Benutzerhandbuch
Vorbereitung
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
..I.I...I..II..II.I..~
Kamera einschalten (Batterie- oder USB-Betrieb)
CompactFlashTM-Speicherkarten
(CF) verwenden
Eigenschaften der Kamera
II..................................
*I...a.....II.mm
(optional)
m..........
2
I,III.III.I
2
.
m..
. . . 2-3
..,.I......
3
Bilder und kurze Filme aufnehmen
...............................................
3-4
-I
Bilder oder Filme ansehen..
.............................................................
4
Ubersicht des OSD-Menus
............................................................
5-7
I
Softwareinstallation
.........................................................................
7-8
Kamera an PC oder
Mat
anschlieoen
.............................................
8
TWAIN-Treiber fur Windows 98
starten
.............................................
8
Bilder am
Mat
ansehen
....................................................................
9
Bilder unter Windows 98 bzw. am
Mat
iibertragen
.........................
9
Anwendungen
fur
Videokonferenz und Bildaufnahme
....................
9
Bilder mit dem Viewer verwalten
...............................................
IO-11
Technische Daten
............................................................................
11
Hilfreiche Tips
.............................................................................
12-13
12 Mustek
GSmart
350