User's Manual
Table Of Contents
- Safety and Precautions
- Contents
- Supported Devices
- Unpack
- Scanner Parts
- LED Messages
- Insert AAA Batteries
- Set the Resolution
- Set the Scanner Mode
- Install the iScanAir Go app (Wi-Fi Mode)
- Connect to Wireless Network (Wi-Fi Mode)
- Scan, Save, and Share (Wi-Fi Mode)
- Use as the Standalone Scanner (MicroSD Mode)
- Clean Lens and Rollers
- Calibrate
- Helpful Hints
- Specifications
10
Set the Scanner Mode
Locate the Wi-Fi/MicroSD switch on the side of the
Scanner. Slide the switch to “Wi-Fi” or “MicroSD” for
setting the scanner mode.
In the Wi-Fi mode, you can scan images directly to a
supported device using direct Wi-Fi connection. See p.11
for operations.
In the MicroSD mode, you can use it as a regular handy
scanner and save the images in a MicroSD card located
on the side of the scanner. See p.15 for operations.