Installation Guide

INSTALLATION:

1. Determine which side of the cabinet the wash machine waste hose will be connected.

Next, examine the pre-connected Hose (23) at the back of the tub. If the hose is going in the “right”

direction, and the proper port, go to Step 2. If not, loosen the Hose Clamp (24) and rotate the hose to

the opposite side. Retighten hose clamp.

2. Remove Screw (22) and Speed Nut (10) from the Hose Mounting Plate (21). Insert tubes of mounting

plate through holes in side of cabinet. Insert screw from the outside of panel, through mounting plate,

into speed nut and tighten securely. Check Handiflo

hose to mounting plate connection, tighten

securely.

Numbers in parenthesis ( ) refer to KEY No’s. in parts list on page 4.

Dimensions shown in parenthesis ( ) are metric equivalents in millemeters.

SPECIFICATIONS:

SI-179 (09•08)

MODEL: 94 DURATUB

CABINET STYLE SINGLE LAUNDRY TUB

W/HANDIFLO

WASTE HOSE CONNECTOR

Quality Plumbing Products

E.L. MUSTEE & SONS, INC.

5431 West 164th Street • Brook Park, Ohio 44142

PAGE 1
MODEL: 94 DURATUB® CABINET STYLE SINGLE LAUNDRY TUB W/HANDIFLO® WASTE HOSE CONNECTOR SPECIFICATIONS: Dimensions shown in parenthesis ( ) are metric equivalents in millemeters. INSTALLATION: 1. Determine which side of the cabinet the wash machine waste hose will be connected. Next, examine the pre-connected Hose (23) at the back of the tub. If the hose is going in the “right” direction, and the proper port, go to Step 2. If not, loosen the Hose Clamp (24) and rotate the hose to the opposite side.
PAGE 2
CAUTION Do not subject tub or cabinet to direct torch flame while making sweat/solder connections —use compression fittings whenever possible. Check local plumbing codes for faucet and drain connection compliance. 3. Refer to the Faucet/Owners Manual for installing and connecting the faucet. If the cabinet will be placed flush against the wall use flexible supply lines or CPVC tubing and fittings. 4. Mount the faucet on the back ledge of Rim (2).
PAGE 3
PARTS ILLUSTRATION SI-179 (09•08)
PAGE 4
MODEL: 94 DURATUB® CABINET STYLE SINGLE LAUNDRY TUB W/HANDIFLO® WASTE HOSE CONNECTOR PARTS LIST PART NO. KEY NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 WHITE CABINET 92.200 91.201 91.818 91.807 95.302 95.306 95.308 92.101 91.804 91.805 95.310 95.803 95.600 91.801 10.207 93.404 95.301 91.307 91.309 23.303 94.708 91.803 93.702 93.701 94.700A 94.302 92.706 94.802 26.803 DESCRIPTION Cover-Molded Rim Oval Head Screw, No.