Dimensions Guide

Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
500 DURAWALL
®
Fiberglass Bathtub Wall
Design features:
 Produced from high-grade, reinforced, molded fiberglass for optimum
strength and impact resistance using matched metal molds under heat
and pressure.
 Ideal for new or remodel projects…fits all Topaz
™
Fiberglass Bathtubs, as
well as standard 30” x 60” bathtubs of other manufacturers.
 Includes three large, molded-in, self-draining shelf ideal for shampoo,
soap, etc.
 Five panel wall system with seamless corner panels and overlapping
edges, create a watertight wall surround.
 Panels can be trimmed to simplify installation in out-of-plumb alcoves or
for installing DURATRIM
®
window kits.
 Adhesive mounts to drywall or like surfaces
 Available in white or bone.
 Smooth, colorfast semi-gloss finish, resists scuffs.
 Mold and mildew-resistant…easy to clean
General: Furnish and install as shown on plans DURAWALL® Bathtub
Walls, model 500, as manufactured by E.L. Mustee & Sons, Inc. The wall
system shall be five-piece construction with three molded-in shelves
and double face tape applied to underside edges of panels for a better
seal. Panels shall include 20% fiberglass reinforced composite material
and be manufactured with matched metal molds using extreme heat
and pressure with a uniform thickness of 70 mils. Shall be semi-gloss,
scuff-resistant surface. Unit shall meet or exceed applicable test, per
ANSI Z 124-2011. Color _______ (White, Bone).
Requires three to five 11 oz. cartridges of panel adhesive labeled for
bonding to Bathtub or Shower walls.
Don’t use adhesive containing tar, asphalt, lacquer thinner or toluene.
Code Accepted
 American Society of Testing and Materials (ASTM) – D635, E-84 and E-162
 American National Standards Institute (ANSI) - Specification ANSI Z 124-2011
 Inhalation Toxicity Test – to evaluate inhalation health hazard with combustible products.
 CAN/ULC S102-07 Burn and Smoke Test
Specifications
SEE PAGE 2 FOR A LIST OF ACCESSORIES!
Model Color Fits Alcove UPC
500WHT White 30” x 60” 6 71031 00181 8
500BN Bone 30” x 60” 6 71031 00171 9