Dimensions Guide

Sectional View
5
1
/
2
"
4
1
/
2
"
SUB-FLOOR
2
1
/
2
"
THRESHOLD
1
"
DRYWALL
1
/
8
"
GAP
5
"
2 x 4
STUD
WALL
SQUARE OPENING
THRESHOLD
A
A
B
B
C
25
3
/
8
"
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
DURABASE
®
Fiberglass Shower Floors
Neo-Angle, Single Threshold
Design features:
 Sturdy, 1-piece molded fiberglass construction — ribbed underbody for
extra strength, slip resistant Starburst® surface
 Integral molded drain with seal for connection to 2” Sch. #40 ABS, PVC
or iron DWV sanitary drain pipe. See optional drain seals for 1-1/2” pipe
and 2” copper — removable strainer
 Available in White, Biscuit and Bone (see chart below)
 Semi-gloss surface — resistant to mold and mildew, easy to clean
 Designed to be used with Mustee’s DURAWALL
®
shower walls, ceramic
tile or preformed wall kit
General: Furnish and install as shown on plans.
DURABASE® Neo-Angle, corner threshold shower floor
model _________ as manufactured by E.L. Mustee &
Sons, Inc. Floor to be one-piece, molded fiberglass, made
with matched metal molds. Surface to be slip-resistant
Starburst® design that does not interfere with the flow
of water. Size ____” x ____”. Shoulder will be no less than
3” high or less than 1” wide. Tiling flange will extend not
less than 1” higher than the threshold which provides
an integral molded water barrier. Threshold will be not
less than 4 ½” high. Molded-in drain and drain seal for
installation of 2” iron DWV (Sch. 40) PVC or ABS sanitary
drain pipe. Removable strainer. Shall meet ANSI Z 124-2011.
Color: _______ (White, Bone, Biscuit)
Code Accepted
 International Association of Plumbing and Mechanical Officials® (IAPMO®)
 Warnock Hersey® (Canada) Listed – CSA test standards Shower Floor
 American National Standards Institute (ANSI) - Specification ANSI Z 124-2011
 American Society of Testing and Materials (ASTM) – D.635, E-84 and E-162
 CAN/ULC S102-07 Burn and Smoke Test
Specifications
SEE PAGES 2-3 FOR A LIST OF ACCESSORIES!
Model Nom. Size Color UPC A B C
3636CM 36” x 36” White 6 71031 00140 5 36” 12” 18”
3636CBN 36” x 36” Bone 6 71031 00138 2 36” 12” 18”
3636CBT 36” x 36” Biscuit 6 71031 00377 5 36” 12” 18”
Centerlines: 17-1/2” x 24-3/8” x 17-1/2”
3838CM 38” x 38” White 6 71031 00160 3 38” 12” 20”
3838CBN 38” x 38” Bone 6 71031 00158 0 38” 12” 20”
3838CBT 38” x 38” Biscuit 6 71031 00378 2 38” 12” 20”
Centerlines: 19-1/2” x 24-3/8” x 19-1/2”
4242CM 42” x 42” White 6 71031 00318 8 42” 12” 24”
4242CBN 42” x 42” Bone 6 71031 00319 5 42” 12” 24”
Centerlines: 23-1/2” x 24-3/8” x 23-1/2”
Note: Centerline varies, based upon thickness of side walls. Placement of enclosure off line also allows for adjustment