Dimensions Guide

FILLER
PANELS
MOUNTING BRACKET
FLOOR
1-1/2” LEVEL
ADJUSTMENT
FloorWall
Top View
34
"
APPR
OX.
14
3
/
8
"
34
"
APPROX.
24
"
20
"
40
"
13
3
/
4
"
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
26F and 26W UTILATWIN
®
Laundry/Utility Tubs — Premier
Design features:
 High strength, one piece molded construction
 Produced with Mustee’s proprietary DURASTONE® — combination
of fiberglass and crushed stone blended with special resins for extra
strength and durability
 Includes Twin-Drain Waste connector which joins drain assemblies to
assure rapid and uniform waste water discharge…includes washers,
slip nuts and stoppers.
 Divider wall between tubs is recessed one inch, permitting water to
overflow from one tub to other, prevents water spilling onto floor.
 Large, self-draining back shelf with retainer curb that prohibits water
run-off except into tub.
 19 Gallon capacity per tub, extra deep 13” tubs with smooth surfaces
 Connects to standard 1-½” P or S trap
 Accommodates single or dual-handle faucets. 4” or 8” centers
 Floor model includes heavy gauge steel legs with adjustable levelers
 Wall model includes wall mounting bracket, side supports and
mounting hardware for securing tub to concrete or stud wall
 Mold and mildew-resistant components
 Easy to assemble and install
 Color-fast, marbleized white finish
Code Accepted:
UTILATUB® and UTILATWIN® Laundry/Utility Tubs meet or exceed performance requirements as listed:
 International Association of Plumbing and Mechanical Officials (IAPMO)® Listed
 Warnock Hersey® (Canada) Listed—CSA test standards: Laundry Tray - #B45.0 and #B45.5; Drain - #B125
 American National Standards Institute (ANSI)—Specification Z 124-2011
General: Furnish and install as shown on plans, UTILATWIN® Twin Laundry/Utility
Tub model____(26F, 26W), as manufactured by E.L. Mustee & Sons, Inc. Tub shall be
one-piece molded construction using DURASTONE®, a blend of natural crushed
stone and polyester resins molded with matched metal molds under extreme heat
and pressure. Tub to include integrally molded drains, twin drain waste coupling,
recessed divider wall between tubs and twin drain assembly for connection to
standard 1-1/2” P or S-trap, stoppers and wall mounting hardware or heavy gauge
steel legs with built-in levelers. 19 gallon capacity per tub, each tub 13” deep. Shall
meet ANSI Z 124-2011. Color: White. Weight: 26F 48 lbs.; 26W 48 lbs.
Colors & Models: Model Mounting H x W x D UPC
White 26F Floor 34” x 40” x 24” 6 71031 00054 5
White 26W Wall 34” x 40” x 24” 6 71031 00055 2
Specifications
SEE PAGE 2 FOR A LIST OF ACCESSORIES!