Specifications

Engine Information
Item Description
Configuration Longitudinally mounted, 90-degree
V8, cast aluminum cylinder block
and cylinder heads
Bore x Stroke 3.681 x 4.165 inch
(93.5 x 105.8 mm)
Displacement 5810 cc (355 cid)
Compression ratio 9.0:1
Horsepower on 93 octane fuel 662 horsepower @ 6500 rpm
Torque on 93 octane fuel 631 lb-ft torque @ 4000 rpm
Redline 6250 rpm continuous
7000 rpm temporary over-rev
Specific output 112 hp per liter
Valvetrain Dual overhead chain-driven cams,
roller finger followers with
hydraulic lash adjustment,
ovate-wire valve springs, four
valves per cylinder
Ignition High energy coil on plug ignition
with Motorcraft® Iridium-Platinum
spark plugs
Fuel system 55 lb/hr injectors with twin
high-flow pumps
Mass air sensor 105 mm (4.13 in.) circle
Throttle body Twin 60 mm (2.36 in.) diameter
bore-simultaneously open
Pistons Shallow-dished forged aluminum
Crankshaft Forged steel balanced with
tungsten inserts
Connecting rods Forged steel I-beam
Supercharger Eaton TVS 2300
Exhaust manifolds Cast high-silicon, molybdenum iron
Exhaust system Dual stainless steel
Shelby® GT500® Unique Features
8
2013 05+ Mustang (197)
Supplement, 2nd Printing
USA (fus)