Specifications

• Tire pressures are specified cold and should be checked after the

vehicle has been parked for at least 3 hours. Do not reduce pressure

of warm tires.

• Check your tire pressure often to maintain it properly. Tire pressure

can diminish over time and fluctuate with temperature.

• Do not overload your vehicle. Maximum vehicle and axle weights are

listed on the tire information placard.

• Extra caution should be taken when operating the vehicle near its

maximum load, including assuring proper tire pressure and reducing

speeds.

• Extra caution should be taken when operating on rough roads to avoid

impacts that could cause tire damage.

• In the event that you encounter an abnormally harsh impact, inspect

your tires for damage.

• Inspect your tires for damage on a regular basis. If a tire is damaged,

replace it immediately.

• Proper suspension alignment is critical for maximum performance and

optimal tire wear. If you notice uneven tire wear, have your alignment

checked.

• Rotate tires as recommended in the following section Tire rotation.

• When replacing tires, the only way to maintain original performance is

to use the original equipment tire. If a different tire is used, it should

be the same size, speed rating and load rating and be replaced as a set

of four. Never mix tire brands.

WARNING: For vehicles equipped with performance package

tires (P265/40-19 front, P285/35-20 rear), only replace wheels

and tires with the EXACT original brand, size and construction tire

with which your vehicle was originally equipped. Use of any other

wheel/tire combinations, even with identical size ratings, may result in

insufficient running clearances, tire rubbing and eventual puncture.

Loss of tire pressure could lead to a loss of vehicle control leading to

serious injury or death.

Wheels and Tires

2013 05+ Mustang (197)

Supplement, 2nd Printing

USA (fus)