Installation Instructions
BOUND
MUSSEL
™
ADHESIVE TILE MAT
BROCHURE/INSTALLATION INSTRUCTIONS
2
www.musselbound.com
FREQUENTLY ASKED QUESTIONS
What is MusselBound Adhesive Tile Mat? MusselBound is a white, double-sided adhesive mat that replaces messy
and dicult to use mortar with Peel & Stick Simplicity. Beautifying tile backsplashes, countertops and tub/shower walls
with new tile is Quick, Easy and Clean with MusselBound.
Why use MusselBound instead of traditional mortar, thinset or mastic adhesives?
MusselBound is QUICK, EASY and CLEAN! Mortar, thinset and mastic are not.
• No trial and error when mixing powder and water and no special tools
• No rushing to set tiles before mortar dries out
• No sagging tiles on vertical applications
• No mortar to clog spaces between tiles. Eliminates tedious cleaning prior to grouting!
• No show-through that changes the color of glass tiles
• No waiting up to 24 hours for mortar to cure before grouting. Finish project same day!
Is MusselBound strong? Yes! MusselBound is very strong! When MusselBound’s adhesive combines with grout it
creates a lasting bond.
Can all types of tile and stone be adhered with MusselBound? MusselBound is versatile! It can be used with
at-backed glass, stone, porcelain, ceramic, or metal tiles, as well as, mesh-backed mosaics. Tiles must not be heavier
than 7 lbs (3.2 kg) or exceed ½” (12.7 mm) in thickness or be larger than 12” x 12” (20 x 20 cm). There are no minimum
tile size restrictions with MusselBound. Grout spaces must be a minimum of 1/8” (3.18 mm) and should be grouted
within 24 hours of setting the tile.
What if I want to use tiles of dissimilar thicknesses, but I want the surface to be uniform? It’s EASY!
MusselBound is a 1/32” (0.8 mm) thick adhesive mat that can be layered to oset tiles of dierent thicknesses e.g., stone and
ceramic, to create a uniform thickness.
On what surface types can MusselBound be applied? MusselBound can be applied to most clean, at, painted/
unpainted, well-bonded surfaces, such as drywall, cement-board, plywood, laminate and even existing tile. This application
shortcut prevents costly and time consuming demolition.
For which applications should I not use MusselBound? MusselBound should not be applied in an outdoor
application. MusselBound is not recommended for oors, ceilings, replaces, steam rooms, shower oors and submerged
projects. While MusselBound is moisture impermeable, it is not intended to replace waterproong products for tile.
What other materials or tools are needed to complete my tiling project? In addition to tile and grout, you
only need a clean, at workspace to utility knife cut MusselBound. The required tools include a utility knife, measuring tape/
straight edge, grout oat, sponge and bucket. Optional tools can include tile spacers and a tile saw or tile cutter and level.
Can I reposition MusselBound on the wall or reposition tiles on the MusselBound adhesive mat? It’s EASY!
MusselBound is designed to be gently positioned on the wall and if needed, removed and repositioned. Pressing rmly
on the adhesive mat activates its strong bond. Similarly, gently applied tiles may be repositioned prior to activating the
adhesive with rm pressure.
How much time do I have to install tile once adhesive has been applied to surface? MusselBound allows the
exibility to install tiles immediately or at your own pace. Simply leave the release liner on until ready to install tiles.
Where can I nd installation information? Easy-to-follow installation instructions with application photos are provided
on the following pages. You can also visit www.musselbound.com for instructional videos and additional information.