Use and Care Manual

Step 6
Getyourassistantandlocatethetopofyourmantel.Thistopisveryheavy.
Itwilltake2peopletoliftandpositionitinplace.Ensurethetopgoesonthe
outsideoftheassemblytobepositionedcorrectly.Thetopmustgooverthis
guidetobepositionedcorrectly.Lineuptheholesonthetopofthemantel,
insertandtighten4wingnutsand4lockwashers.
Step 7
Ifyouareusingthismantelinacornerapplication,locatethetriangularpiece
ofwoodwhichattachestothemanteltocreatethecornerunit.Youmust
attachthispieceforallcornerapplications.Slidethecornerbottomsupport
intothechannellocatedatthemiddleofthebackofthehearthbase.Place
thetopcornerattachmentontheoorupsidedown.Protectitfromdamage.
Attachthecorneruprightsupporttothecornerattachmentbyliningupthe
holeinthecorneruprightwithholeinthecornertopinsertwith1nutand1
lockwasher.Simplytakethetriangleandslidethebracketswiththeholes
ontothepinswhicharealreadyattachedtothemantel.Oncethetriangleis
attached,pushitupsoitislevelwiththemantelandlockitintoplace.To
lockitintoplacesimplyturnthehorizontalwoodenblocksattachedtothe
undersideofthemantelintoaverticalpositiontosupporttheweightofthe
cornertriangle.Nowattachthecornerbottomsupporttothecornerupright
supportbyinsertandtightening1wingand1lockwasher.
3
Step 6
Step 7