Instructions / Assembly

4
Step 8
Takeyourelectricreboxoutofitspackagingandpositionitbetweenthe2legs
ofthemantel.Onceyouareclosetothewall,plugthereboxintothenearest
outlet.
Thereboxcomeswith3metalbracketsand20blackscrews.Thesemetal
bracketsmustbeattachedtoboththesidesofthereboxandthemantelto
ensurethatyourreboxdoesnotmovearoundasyouuseit.2ofthebrackets
have2largeholesononeside.Theselargeholeslineupwith2screwsonthe
sideoftherebox.Theotherscrewsprovidedmustbeinsertedintotheholes
attheotherendofthebracketandintotherebox.Theothersideofeach
bracketattachestothemantel.
The3rdbrackethasnoholeson1side.Thatsideshouldgoupagainstthe
reboxtopbutshouldnotbeattachedastheheatersitsrightunderneaththe
bracket.Onlythemantelsideshouldbeattached.
Ifyouhaveanyquestionsaboutthereboxpleasereferencetheinstallation
instructionsthatcomewiththerebox.PleasereferencetheQuickTipssection
ofthatinstructionmanual.
NOTE: Some fireboxes come with pre-attached trims
Step 9
Youarenowreadytopositionyourmantelagainstthewall.Thissteprequires2
peopletomovetheunit.
Anti-tipping device
Youmustattachtheanti-tippingdevicetothemantelandthewall.Thisdevice
isasafetyfeaturethatwillpreventthemantelfromtippingover.Appliedweight
maycausemantelimbalance.
AttachtheLBracketstothebackofeachmantelsideusing2smallathead
screws.Attachthecrossbarstoyourwallatastudifpossible.Ifthereisno
studdrillasmallholeinyourwallandinserttheanchors.Ensurethescrew
holesareatthebottomofthecrossbars.Insert2largeatheadscrewsper
side.Thecrossbarsandthebracketsmustbepositionedatthesameheight
asyouneedtoslidethecompletedmanteltotherighttopositiontheL
bracketssecurelybehindthecrossbar.
Step 8