Use and Care Manual

Using
Ember bed/Logset
Display
Orange Green Blue
Red
Red/Blue
(Mix to Purple)
Red
Cycle
Red/Green/
Blue (Mix to
White)
Cycle
The Ember Bed / Log Control Button
Pressing the enber bed control button (7) once lights the ember bed.
Continue to press the ember bed control button (7) to cycle through
different colors of the ember bed. Reference the table for more information.
1 2 3 4 5 6 7
1 2 3 4 5 6 7
HEATER LOCKING FUNCTION
-
Display
Off4th Press
-
-
-
-
-
-
14
To turn off heat mode, press and hold the flame button for 5 seconds to enter heat lock out mode
Flame lights will flash 5 times to signal the heat function is turned off and locked out. To turn on
heat mode, press and hold the heat button for 5 seconds, the flame lights will flash 5 times and the
heat function will be restored. If the the heater function is locked, the flame lights will keep
flashing by press the heater button (3).