User manual

EFX MkIII Audio Controller User Manual 7
3.3 Edit Mode
The Edit Mode contains the utility functions. To enter the Edit Mode, you m ust be in
the Preset Mode. Press/hold the MODE switch to enter the Edit Mode for 1 second.
The display will show:
Press/hold the PS-1 switch(FS, function select) to scroll the utility functions.
Below is a list functions in the o rder that they are shown.
Function Select Order List
PC.1 sets 1st MIDI Program Change
PC.2 sets 2st MIDI Program Change
PC.3 sets 3st MIDI Program Change
PC.4 sets 4st MIDI Program Change
PC.5 sets 5st MIDI Program Change
LP.1 sets 1st MIDI Control Change for the Loop1 On/Off
LP.2 sets 2st MIDI Control Change for the Loop2 On/Off
LP.3 sets 3st MIDI Control Change for the Loop3 On/Off
LP.4 sets 4st MIDI Control Change for the Loop4 On/Off
LP.5 sets 5st MIDI Control Change for the Loop5 On/Off
LP.6 sets 6st MIDI Control Change for the Loop6 On/Off
LP.7 sets 7st MIDI Control Change for the Loop7 On/Off
LP.8 sets 8st MIDI Control Change for the Loop8 On/Off
FS.1 sets 9st MIDI Control Change for the Function Switch1 On/Off
FS.2 sets 10st MIDI Control Change for the Function Switch2 On/Off
FS.3 sets 11st MIDI Control Change for the Function Switch3 On/Off
FS.4 sets 12st MIDI Control Change for the Function Switch4 On/Off
EPL / ESW sets MIDI Control Change for the continuous control port XPDL
Pr.0 ~ Pr.9 selects 10-stage popping noise reduction control
3.3.1 Editing MIDI Program Change
Select the preset to be edited in the Preset Mode①
Press/hold the② MODE switch to enter the Edit Mode for 1 second if you are in
the P reset Mode. The PC.1 will be automatically selected and the display will
show:
Press the③ PS-2 switch(CH, channel) to set a PC.1 channel number. The display
will show the current PC.1 channel.
Press/hold the④ BANK UP or BANK DOWN switches to select a channel from 1
through 16.
Press the⑤ PS-2 switch to store a new PC.1 channel in memory. The display will show str (store) for a
moment.