User manual

EFX MkIII Audio Controller User Manual 12

4. Power Requirements

The EFX MkIII Audio Controller requires regulated 12VDC or 9VAC at approximat ely 240mA. The power jack

is a standard 5.5mm/2.1mm barrel.

Also, the EFX MkIII Audio Controller can be powered from outputs 5 or 6 of the Voodoo Lab Pedal P ower 2

Plus. You must set the corresponding DIP switch away from the normal position.

5. Initial Default Setting

The initial default setting for the EFX MkIII Audio Controller may be reset with the

following procedure. This procedure will erase all user data from the EEPROM

memory. Apply power while holding the MODE and PS-1 switches down. The display

will show:

At this moment, two switches can be released.

When the initial default setting is successful, the EFX MkIII Audio Controller will automatically restart.

Initial Default MIDI Setting

Bank . Preset

PC1 PC2 PC3 PC4 PC5 CCs

CH NUM CH NUM CH NUM CH NUM CH NUM CH NUM

Global

not

1 not

1 . 1 1 not not not not

1 . 2 2 not not not not

1 . 3 3 not not not not

1 . 4 4 not not not not

⋮ ⋮⋮⋮⋮⋮

32 . 3 127 not not not not

32 . 4 128 not not not not

33 . 1 not not not not not

33 . 2 not not not not not

⋮ ⋮⋮⋮⋮⋮

60 . 4 not not not not not