RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 2 Tuesday, September 2, 2008 4:25 PM Rocketfish RF-WS01/WS01-W/WS02 Digital Wireless Speakers Contents Introduction ...................................................................... 2 Features............................................................................... 5 Setting up your system ...............................................12 Using your system.........................................................15 Maintaining your system ................
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 3 Tuesday, September 2, 2008 4:25 PM Your RF-WS01, RF-WS01-W, or RF-WS02 Digital Wireless Speakers use a proprietary 2.4GHz wireless communication system to transmit low-latency, high fidelity audio from an audio source to wireless speakers, providing a superior level of audio quality and resistance to interference. The system accepts line-level inputs, and is compatible with a complete range of multi-channel home theatre systems or AV receivers.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 4 Tuesday, September 2, 2008 4:25 PM • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 5 Tuesday, September 2, 2008 4:25 PM Features • • • • • 2.4 GHz wireless sender and speaker Transmits high quality audio over a radio frequency communication link Compact size Hidden antennas Low power consumption Package contents Examine the contents of the box for your Rocketfish Digital Wireless Speakers. The box should contain.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 7 Tuesday, September 2, 2008 4:25 PM Back view 1 2 3 Item Description 1 2 3 RCA audio input terminals DC IN jack Pairing (manual connect) button Speaker The speaker receives the 2.4 GHz audio signals from the sender and plays out the sound using the built-in amplifier and speakers. The speaker can operate from the supplied AC adapter or from batteries.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 12 Tuesday, September 2, 2008 4:25 PM Setting up your system Caution: Turn off your audio source while connecting the units Connecting the sender To connect the sender to an audio source: 1 Connect a stereo RCA cable from an audio source to the sender taking care to match white and red colors at both ends. Make sure that the cable is connected to an audio source and not a video source.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 13 Tuesday, September 2, 2008 4:25 PM Connecting the speakers Plug the AC power adapter in if batteries are not being used or if the batteries are discharged. Caution: To avoid risk of fire, and to prevent damage, only use the AC adapter supplied with your digital wireless speakers. Make sure that power supply outlet matches the AC adapter’s 120V before making the connection.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 14 Tuesday, September 2, 2008 4:25 PM Installing batteries into the speakers Caution: Do not mix battery types. Do not use old and new batteries together. Remove all batteries if the unit is not going to be used for a long period of time. 1 With the speaker AC adapter disconnected, open the battery cover. 2 Install eight (8) C size batteries taking care to follow the battery polarity markings on the battery compartment.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 15 Tuesday, September 2, 2008 4:25 PM Using your system Turning on your system To turn on the system: 1 Move the Power switch to the ON position on the side panel of the sender. The green Link Status LED starts to blink slowly to indicate the sender is plugged in and in Standby mode. 2 Press the Power switch on the front panel of the speakers. The green Status LED starts to flash to indicate the receiver is plugged in and in Standby mode.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 16 Tuesday, September 2, 2008 4:25 PM Turning off the system To turn off the system: 1 Move the sender Power switch to the OFF position. The Green Link Status LED goes off indicating that the sender is turned off. 2 Push the Power switch on the front panel of each speaker. The Green Link Status Power LED goes off to indicate that the speaker is turned off.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 17 Tuesday, September 2, 2008 4:25 PM Maintaining your system Use a soft cloth dampened with a weak solution of mild detergent and water. Dry the apparatus immediately afterwards with a clean cloth. Do not use abrasive cloth, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering. Cautions: • Do not cover the ventilation openings with items, such as newspapers, table clothes, and curtains.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 18 Tuesday, September 2, 2008 4:25 PM Problem Solution Sound interference • Move your sender and speaker slowly to find the best reception position for your system. • Shorten the distance to between your sender and speakers. The maximum distance is 55 feet (RF-WS01 or RF-WS01-W) or 100 feet (RF-WS02). • Check to determine if there are any obvious radio frequency interference sources near your system.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 19 Tuesday, September 2, 2008 4:25 PM Speakers (RF-WS01 and RF-WS01-W) Audio Input: Wireless Audio Output Supply Voltage Power Consumption Transmission Delay • Stereo, 48 kHz uncompressed • Bit-rate: 1.465 Mbps • Raw wireless bit-rate: 2Mbps • 8W (RMS) 2-way speaker full range system (10% THD) • High Efficiency Class D speaker amplifier driving internal full range speakers 12V @ 1.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 20 Tuesday, September 2, 2008 4:25 PM This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 21 Tuesday, September 2, 2008 4:25 PM Information for Users on Disposal of Old Equipment [European Union] Note: This symbol is only valid in the European Union. This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 23 Tuesday, September 2, 2008 4:25 PM One-Year Limited Warranty Rocketfish Products (“Rocketfish”) warrants to you, the original purchaser of this new RF-WS01/RF-WS01-W/WS02 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for one (1) year from the purchase of the Product (“Warranty Period”).
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.
RF-WS01-WS02-WS03_08-1575_ENGLISH.fm Page 28 Tuesday, September 2, 2008 4:25 PM www.rocketfishproducts.com (800) 620-2790 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN 55423-3645 USA © 2008 Best Buy Enterprise Services, Inc. All rights reserved. ROCKETFISH is a trademark of Best Buy Enterprise Services, Inc. All other products and brand names are trademarks of their respective owners.
