User guide

www.jbl.com
USING THE MS-8
Calibration/Setup: This selection performs the calibration procedures as documented in
this manual. See Calibration/Setup, on page 24. NOTE: If you would like to recalibrate the
acoustic performance of the system, you may enter its Calibration/Setup section, choose
Acoustic Calibration and re-tune the system without repeating the input-setup, xover-setup
and channel-selection procedures.
System Settings: This selection accesses the MS-8’s operational and display settings. See
System Settings Menu, on page 40.
INPUT SELECTION MENU
This menu lets you select between the MS-8’s Head Unit input (either the line-input
connections or Hi Level input connections) and the Aux input connections. The word Active
indicates which input is currently active.
AUDIO CONTROLS MENU
This menu provides control of all of the MS-8’s audio adjustments.
NOTE: Pressing the Select button while making any adjustment returns the adjustment to the
center position.
System Levels: This screen lets you adjust the levels of the Aux input and the system’s
speakers. Use the Left and Right navigation buttons to vary the levels. (NOTE: If the system
has both side and rear speakers, the Fader control will adjust between the front speakers and
both the side and rear speakers in tandem. It is not possible to adjust the balance between
the side and rear speakers.)
36