User guide

www.jbl.com
CALIBRATION/SETUP
Remeasure seating position: Selecting this option remeasures the seating
position that has just been measured. You can select this option if you think
you’ve made a mistake, if loud noises were present during any of the test-
signal sweeps, if the sweeps were much louder than someone speaking at a
normal volume or if you want to remeasure the seating position for any other
reason.
Quit: Selecting this option aborts the calibration procedure and returns to the
beginning of acoustic calibration.
Done: Selecting this option will complete the calibration process if you do not
wish to measure additional seating positions. The MS-8 will display Acoustic
Measurement Complete > Please wait while it calibrates the system. When the
calibration is complete, the MS-8 will display Main Menu.
Disconnect the microphone, insert your favorite CD and have a listen.
Additional adjustments are available in the Main Menu (see Main Menu, on
page 35).
34