Technical data

LU940407

6. Mai 1992 @ 12:49 Uhr

Switches / Relays

Status / switch

ON or OFF.

You can toggle

it by pressing the

"STORE" key

Function of the switch / relays

Number of the switch / relays:

You can choose it by pressing

one of the SWITCHES 1 - 8 or

with the coursor keys

2 Setting up the Switches / Relays

To change the function of the switches / relays you have to select the SWITCH/F-

AMP menu. (From the "PLAY" menu: Press the CURSOR key [ ] twice.)

To jump into the menu press the CURSOR key [ ] once.

The value above the CURSOR, can be changed with one of the CURSOR keys [ ]

or [ ], until the desired mode is achieved.

With one of the CURSOR keys [ ] or [ ] you can change the position of the

CURSORS to action changes.

Also the flashing LED shows the number of the relais.

You also can use "SWITCHES 1-8" to select the desired switches / relais. After

choosing, each time the same key is pressed will switch through all the four possible

functions.

With the key "STORE" you can directly change the STATUS of the desired

SWITCH.

Easy programming with the functionkeys (F1-F4) :

- F1 = Switches the displayed SWITCH to POS. SWITCH

- F2 = Switches the displayed SWITCH to NEG. SWITCH

- F3 = Switches the displayed SWITCH to POS. PULSE

- F4 = Switches the displayed SWITCH to NEG. PULSE

Note: Only using the"EXIT" key to leave the menu will store the changes into the

internal memory. If you switch the MS-8 off

before pressing the "EXIT" key the

MS-8 can not write into the internal memory and the data is lost.

Main menu: