Product Brochure

| Load Center Selection & Application Guide
8
ES Series Load Centers
Features
The patented
INSTA-WIRE™
neutral/ground
system allows
for faster
installation
because
screws are backed out, ready for
wire insertion. The visible neutral
and grounds system aids in the
insertion of conductors.
The pre-
positioned
bond screw
eliminates
bond strap/
screw
assemblies,
and reduces
the risk of
losing components in the field.
Mounting tabs
on the trim
hold it in place
on the load
center, freeing
up both hands
to drive the
trim screws.
The outdoor enclosure has a
slide hinge door for the easiest
installation and can be removed
by backing out only one screw.
ES Series Load Centers ship in
single piece carton.
Invertible for bottom
feed application.
a
Aluminum bus.
Combination
head screw on
the neutrals,
ground, trim,
upper pan,
and bond
screw provide
installation
flexibility.
A rigid, sturdy
base pan
provides the
ruggedness
required
for the
most harsh
applications.
Single side inboard neutral on
24 circuits and below; dual on
30 circuits and above.
Ground bar field installed
(select skus with “G”
suffix will have ground
bar factory installed).
a
Applies only to NEMA 1 ES and PL Load Centers