Operating instructions

PREPARATION
CAUTION: Do not bend the control
cables. A cable that Is bent or dan]aged
must be replaced.
4. Remove the hair pin from the right and left
handle bracket. (Figure 1)
5. Remove the lower handle from the han-
die brackets (Figure 1),
6. Rotate the lower handle around
(Figure 4). Mount the lower handle to the
handle brackets.
7, InstaJlthe hair pin on the rlght and left han-
dle bracket (Figure 1).
8. Fasten the upper handle to the lower
handle with the bolts and wlngnuts
(Figure 4).
9. Secure the control cables to the lower
handle wi_ the cable ties.
Tab
\
Cable "lie
Figure 4
F- 98534 12