Manual

PREPARATION
CAUTION: Do not bend the control
cables. A cable that is bent or damaged
must be replaced,
4. Remove the hair pin from the rightand leR
handle bracket. (Figure 1)
5. Remove the lower handle from the han-
dle brackets (Figure 1).
6. Rotate the lower handle around
(Figure 4), Mount the lower handle to the
handle brackets.
7. Install the hair pin on the fight and lefthan-
dle bracket (Figure 1).
8. Fasten the upper handle to the lower
handle with the bolts and wingnuts
(Figure 4).
9. Secure the control cables to the lower
handle with the cable ties.
Bolt
Rotate Handle
Tab
\
Cable Tie
Figure 4
F-98527 12