Specifications

Section 78 00-02-0619
01-22-08 - 17 -
Fault Code Popups
A fault condition will trigger a popup dialog box on the screen describing the nature of the fault.
Corresponding red or amber fault lights on the corners of the unit are also activated to indicate
the severity of the fault. The following screens are examples of warning and shutdown fault
code popups.
Warning Shutdown
How to Hide/Show Faults
To hide the fault code popup being displayed on the screen, press the virtual button on the
right next to the “Hide” icon. The popup will disappear, however the “Warning” or “Stop” icon
will remain on the screen to indicate there is still a fault. Pressing “Hide” does not clear the
fault, it only hides the popup message.
When a fault code has been hidden, a “Show” icon will remain in the bottom right corner.
When this virtual button is pressed, the fault code will again be displayed.
Scrolling Through Multiple Messages
The title-bar of the fault code popup may indicate multiple messages, as in ‘Diagnostic
Message 1 of 3’. You may press the Prev and Next buttons to scroll through the different
messages.