Specifications

56 Engine Protection
Order by Phone [phone]
Order On-Line www.farmtronics.com
Specially designed by Murphy to meet the needs for
instrumentation and control on electronically controlled
engines communicating using the SAE J1939 Control-
ler Area Network (CAN). The PowerView system is
comprised of the PowerView and the MLink™ Power-
View Gauges. It is a multifunction tool that enables
equipment operators to view many different engine
or transmission parameters and service codes. The
system provides a window into modern electronic en-
gines and transmissions. It includes a graphical backlit
LCD screen and has excellent contrast and viewing
from all angles. Back lighting can be controlled via
menu or external dimmer potentiometer. The display
can show a single parameter or a quadrant display
showing 4 parameters simultaneously. Diagnostic
capabilities include fault codes with text translation for
the most common fault conditions. Enhanced alarm
indication with ultra bright alarm and shutdown LEDs
(amber & red).
Specications:
l Display: 1.3” x 2.6”, 46 x 128 pixels
l Operating Voltage: 8V DC minimum to 32V DC
maximum
l Reversed Polarity: Withstands reversed battery
terminal polarity indenitely within operating tem-
peratures
l CAN BUS: SAE J1939 Compliant
l Maximum Panel Thickness: 3/8”
l Mounting Hole: 2.062” in diameter
l Dimensions: 6” x 6” x 6”
l Connectors: 6-Pin Deutsch DT06 Series
l Now with MODBUS RTU Communications
l Specically Designed for SAE J1939 Controller Area Network (CAN) Equipment Applications
l Displays over 30 Standard SAE J1939 Parameters
l Broadcast by Major Engine and Transmission Manufacturers’ ECM’s
l Displays Active Faults and ECM Stored Fault Codes for Diagnosing Equipment Malfunctions
l Converts Critical SAE J1939 CAN Data Input Standard MODBUS RTU Information
The MDDM is a powerful, easy-to-use multifunction tool that enables the operator to view many different engine
parameters and engine service codes. It includes a two line, eight character backlit LCD display. The top line
displays data labels; ie, “OilPress.” The bottom line displays appropriate units information; ie, “80 psi” for oil
pressure. Two push buttons are used for scrolling through the parameter list and viewing the menu list. Two
LEDs (amber & red) are used to annunciate active fault messages received by the MDDM. Can be connected
up to 40 meters from the ECM; up to 32 components may be linked to the MDDM by an RS485 daisy chained
twisted pair cable up to 1,000 meters from the MDDM. Standard 2 1/16” chrome gauge.
Murphy Display and Diagnostic Module (MDDM) |
Murphy Display and Diagnostic Module (MDMM)
E86620 MDDM20-C Display and Diagnostic Module $479.95
Display Parameters
The following are some of the engine
and transmission parameters dis-
played by the PowerView & MDDM in
English or metric units:
l Engine rpm
l Engine Hours
l Machine Hours
l System Voltage
l % Engine Load at the current rpm
l Coolant Temperature
l Oil Pressure
l Fuel Economy
l Throttle Position
l Engine Manifold Air Temperature
l Current Fuel Consumption
l Trans. Gear Oil Pressure (PowerView Only)
l Trans. Gear Oil Temperature (PowerView
Only)
l Transmission Gear Position (PowerView
Only)
l Active Service Codes
l Stored Service Codes from the Engine
l Set Units for Display (English or Metric)
l Engine Conguration Parameters
PowerView |
Order No. Mfg. PN Description Price
PowerView
E86720 PV101-A PowerView $479.95
MurphyLink™ J1939 System |
The MurphyLink system has
taken a huge leap forward with the
introduction of PowerView, the next
generation in this advanced prod-
uct line. With PowerView, you can
see what your engine’s Electronic
Control Unit (ECU) is telling you in
plain text. It puts the information
where it’s needed most – at your
ngertips.
PowerView
MDDM