User guide

49
PROVISIONING – UPGRADE AND CONFIGURATION
Local conguration le
The local conguration le contains conguration parameters that are unique for every
conference phone. The settings in this le takes precedence over the settings in the global
conguration le.
The default name for this le is kt300ip-<MAC>.xml, where <MAC> is the MAC address of
the specic conference phone. The MAC address should be written without colons.
It is possible to create a custom name by using the pagename element in the congura-
tion le. It is also possible to refer to a cgi, php, asp, js or jsp le, instead of the xml le,
if this is declared using the type element in the conguration le.
Konftel 300IP searches for conguration les in the following order:
Firmware binary
Contains the rmware binary that will be downloaded and installed by Konftel 300IP if the
metadata le shows that this is a newer version than the present installed. The binary le
can be downloaded from www.konftel.com/upgrades.
Firmware metadata le
A metadata le in xml format with information of the rmware version in the binary le.
The le is used to check if the binary le should be downloaded to the phone or not.
The name of this le shall be kt300ip_fw_version.xml. The le shall contain the following
elements in xml format.
<rmware_version>
<version>X.X.X </version> Eg. 2.0.3
<lename>xxxx </lename> Eg. KT300IP_v2.0.3.kt
<checksum>XXXX </checksum> MD5 checksum of the rmware binary
</rmware_version>
"
%"%
4
5 E
E %
:
=