Manualshelf

User guide

ManualsBrandsMurphy ManualsComputer equipmentKonftel 300
21222324252627282930
24
SETTINGS
IP address IP address of the device (Konftel 300IP). The address is provided
by the network administrator or service provider if DHCP is not in
use.
Hostname Set to kt300ip as default. Can be changed to suitable name.
Netmask Usually set to 255.255.255.0 to limit network trafc to the
subnet.
Domain The domain where the device is located. May be left blank.
Gateway The device or server used for Internet communication.
Primary DNS The address to the primary DNS (Domain Name System) server - a
program or computer that maps a human-recognisable name to its
computer-recognisable identier (IP address).
Secondary DNS The address of an optional secondary DNS server.
On phone: MENU > SETTINGS > ADVANCED > (PIN) > NETWORK (6,2,2).
Quality of Service
Quality of service is used in IP networks to provide different priority to different applica-
tions, users, or to guarantee a certain level of performance to a critical data ow such as
voice or video. Differentiated Services or DiffServ is a networking architecture that speci-
es a simple mechanism for classifying network trafc using a 6-bit eld in the header of
the IP packets. VLAN (Virtual LAN) is a technology to logically divide a physical network
into several logical nets and thus to differentiate trafc.
SIP DiffServ Enter a value between 0 and 63 to prioritize the SIP messages.
Media DiffServ Enter a value between 0 and 63 to prioritize the media packets
(voice).
VLAN By enabling this option, all communication to and from Konftel
300IP is done via the VLAN specied under VLAN ID. Note that
this VLAN also must be used to communicate with Konftel 300IP
via the web interface.
VLAN ID The ID number to be used for the IP telephony VLAN.
VLAN map enable Enabling VLAN priority mapping from the DiffServ setting.
VLAN prio SIP Set a value between 0 and 7 to prioritize the SIP messages in the
VLAN.
VLAN prio media Set a value between 0 and 7 to prioritize the media packets in the
VLAN.
On phone: MENU > SETTINGS > ADVANCED > (PIN) > NETWORK > ETHERNET > VLAN
(6,2,2,2,1).