Specifications

Section 20 00-02-2003
06-21-10 - 20 -
3. Wrap the Teflon tape (3) times around the fitting, hold
down on the threads with your thumb, and pull on the
tape roll to 'cut' the tape. Don’t allow the tape to fray.
You now have a properly wrapped fitting ready for
use. Install the fitting hand tight, and then give it up to
two turns with a wrench. If it wants to stop before two
turns, DO NOT force the fitting. You can damage the
threads or destroy the seal. Do not back off on a
tightened fitting or it might leak.
PHASE OUT / DISCONTINUED
Check Availability