Specifications

Section 20 00-02-2003
06-21-10 - 19 -
Reset Input
Activated by external N.O. relay or push button contact
Reset activation time: 0.5 seconds minimum
Reset current < 10mA
Approvals
UL (Pending)
CSA (Pending)
Teflon Tape 1-2-3 Wrapping Technique
The biggest reason for leaks via the conduit into electrical devices is often improper wrapping
of the Teflon tape on the threads. Here’s a simple 1-2-3 technique that might help.
Caution: Your hands and the fitting should be clean of any debris or dirt.
1. Hold the Teflon tape roll in your left hand and the
fitting in your right.

2. Place the tape on top of the threads, one thread back
from the starting thread, holding it down with your
thumb. Roll the fitting in a clockwise direction,
stretching the tape slightly as you wrap, overlapping
each turn to cover completely.
PHASE OUT / DISCONTINUED
Check Availability