Specifications

Section 20 00-02-2003
06-21-10 - 18 -
Specifications
Environmental
Temperature: -40° and +85°C (-40° and +185°F)
Humidity: 0-95% non-condensing
Vibration: 30 g’s max @ 500 Hz
External Power Requirement
Supply Voltage: 20 - 32 VDC ± 10%
Supply Current: 100mA Max
Frequency Response
6 to 500 Hz, ±5%, on-board sensor version
6 to 1,000 Hz, ±5%, external sensor version
4-20mA Output (Analog Option)
Accuracy ±5% of full scale at 1.5 ips, 100Hz, 21° C (69.8° F)
Alarm Level
Potentiometer for field adjustable alarm level
Alarm level range of 0.1-1.5ips
Alarm Trip Time Delay
Time delay (for actuation) adjustable from 0-10 seconds
Output Relay
Normally-Open and Normally Closed outputs
Contacts rated 60VDC, 1A and 120VAC, 1A
Isolation Voltage (contacts to signal ground): 500VAC
Latching/non-latching output user selectable
Fail-safe or non-fail-safe operation selected by user
LED Outputs
Solid – Alarm Mode
Solid – Non-Latching mode – LED illuminated if above set point
Blinking – Latching Mode – LED blinks if above set point but not yet alarmed
Solid Green – Always illuminated when power is ON.
PHASE OUT / DISCONTINUED
Check Availability