Specifications

Section 20 00-02-2003
06-21-10 - 15 -
Setting the Delay Setpoint
WARNING! Always adjust the Delay to meet your specific requirements.
Too long a delay can result in property damage and/or personal injury.
1. To adjust the Delay setpoint use a slotted narrow head screw driver.
2. Put the screw driver through the adjustment port and into the slot on the top of the delay
potentiometer.
3. To increase the delay setting turn the pot clockwise
Each hash mark on the overlay equals 1 second
Range – 1 to 10 seconds
4. To decrease the Delay setting turn the pot counter clockwise.
PHASE OUT / DISCONTINUED
Check Availability