Specifications

Section 20 00-02-2003
06-21-10 - 13 -
Configuration
Setting the Alarm Threshold
WARNING! Always adjust the IPS alarm threshold to meet your
specific alarm requirements in the environment the machinery is
in. Setting the alarm threshold too high can result in property
damage and/or personal injury.
1. Use a small Phillips or slotted head screw driver to adjust the Alarm Threshold IPS
setting.
2. If you know the threshold setting you want, set the adjustment to rotating the
potentiometer clockwise or counter clockwise until the indicator is pointing at the correct
Alarm Threshold.
Clockwise – Increases the IPS alarm setting
Counter Clockwise – Decreases the IPS alarm setting
Each hash mark on the potentiometer equals 0.1 IPS
Range – 0.1 to 1.5
PHASE OUT / DISCONTINUED
Check Availability