Specifications

Section 20 00-02-0841
2013-01-14 - 17 -
Specifications
Performance
Vibration Range (Adjust Jumper S1): 0.75, 1.50 or 3.00 IPS/peak
Frequency Range: 5 to 1000 Hz
Analog Output (R
load
): 4 to 20 mA ≤ 500 Ω
Raw Signal (R
load
): 100 mV/g (offset + 5VDC) ≤ 20 kΩ
Environment
Operating Temperature: -22°F to +185°F (-30C to +85C)
Storage Temperature: -40°F to +185°F (-40°C to +85°C)
Enclosure Classification: IP68
EC Type Certification # Rating: BSI 07 ATEX 1532458U EX d IIC T6 , Ex tD A21 T 100°C
Cable Connection: ½ NPT, IP66, IRA 06 ATEX 1188 X SIRA 07 ATEX 4327 X
Electrical
Sensor Type: Accelerometer
Power Required: 20 to 30 VDC
Current Draw: <40 mA
Electrical Connectors: Spring Terminals
Relay
Switch Contact Capacity: 30 VDC/1A, 150 VAC/0.46 A
Relay Function: Non-Latching
Threshold Set Point: 10 to 100% of Alarm Set Point
Normally Energized (NE): Fail Safe
Time Delay (Adjust DIP Switch S1 and S5): 1 or 5 seconds
Physical
Housing Material: Aluminum/Epoxy Paint (Red)
Weight: 1.54 lbs. (0.7 kg)
Size (H x W): 4.9 in x 3.9 in (125 x 100 mm)
Mounting Threads: ½ “ NPT Female, ½” NPT Male/Male SS
Indicators
Alarm (LED): Yellow
Shutdown (LED): Red