User`s manual

-15-

13 FIRMWARE UPGRADE

13.1 INSTALLING THE SURF FIRMWARE UPGRADE SOFTWARE

In order to upgrade firmware on site, a CD will be provided by S.&A.S.Ltd & the below steps shall be

followed:

1. Run file “SAS_Patch.exe” located in “Surf120_PTool\SAS_PTool” folder.

2. Setup the application located in “Surf120_PTool\SAS_PTool \SAS_PTool_Setup” folder

3. SAS_PTool will appear in the programs list. Send it to Desktop as shortcut.

13.2 INSTALLING THE SURF USB DRIVER

1. Plug in the USB cable to the SURF device before turning power on

2. Turn on power of the SURF device. All the leds on the front starts blinking.

13.2.1 DRIVER SETUP FOR WINDOWS VISTA/WIN7

The first SURF plugged into the PC USB port may not launch an automatic start. In this case, right-click

my computer and choose properties. The following window appears. On the left side of the window, click on

Device Manager.

This will be implemented only one time when the first Surf is connected to PC through USB.