User`s manual
-14-
SMS
Alias
Display Parameter Description Range Factory setting
A67 SPD Speed Select
13
PRI=Primary speed (0)
SEC=Secondary speed (1)
PRI
A68 UPW User Password 000 to 999 000
A69 Mod Modem Type
No=no modem (0)
LM=Line modem (1)
GSM=GSM modem (2)
No
A70 PHONE Phone Number (3 to 18 digits) 0
A71 SITEId Identification Code (6 digits or letters) SURF00
A72 dHC DHCP Enabled N (0),Y (1) N
A73 IP Adr IP Address ---.---.---.--- 192.168.0.21
A74 SubNET Subnet Mask ---.---.---.--- 255.255.255.0
A75 GATEWY Default Gateway ---.---.---.--- 192.168.0.1
A76 UPH Utility Connection (AMF & AMF/ES only)
3PH=3 phase (0)
1PH=1 phase (1)
3PH
A77 GPH Genset Connection
3PH=3 phase (0)
1PH=1 phase (1)
3PH
A78 dATE Set the date DD.MM.YY -
A79 TIME Set the time ##h##P or ##h##A -
A80 T--RdY Set the genset ready time
ALLTIM, ##h##P or
##h##A
-
A81 T--SdbY
14
Set the genset standby time ##h##P or ##h##A -
A82 RdYdAY Set the genset ready days -
A83 ALL N (0),Y (1) N
A84 SUN
15
N (0),Y (1) Y
A85 MON
1
5
N (0),Y (1) Y
A86 TUE
1
5
N (0),Y (1) Y
A87 WED
1
5
N (0),Y (1) Y
A88 THU
1
5
N (0),Y (1) Y
A89 FRI
1
5
N (0),Y (1) Y
A90 SAT
1
5
N (0),Y (1) Y
A91 WEX
16
Weekly exercise N (0),Y (1) N
A92 S--NAME Server name
www.sascontrollers.
com
A93 S--IP Server IP Address ---.---.---.--- 69.167.158.129
A94 HR. Modify Hour meter (only if ECU=No) 0 to 65530 000000
A95 KWh Modify KWhour 0 to 999999 000000
- ERSFLT Erase Fault Log --- ---
- VIEWFT View Fault Log --- ---
- EXIT Exit Menu --- ---
12 TECHNICAL SPECIFICATION
Supply voltage range 5 to 33Vdc
Maximum suppl
y
current 180mA
Standby supply current 56mA
Digital inputs activation logic Low (ground)
Solid-State Output ratin
g
1A 50V
AC inputs range (L-N) 0 to 256Vac
CT inputs range 0 to 5A
Operating temperature
-30 to 70C
User access Five push buttons
Data sampling rate 0.4samples/sec
Dimensions 196x144x33
Panel cut out 182x137
14
Appears only if T—Rdy is set to time
15
Appears only if ALL is set to N
16
When enabled, if generator did not operate between Sunday and Friday, it would be started on Saturday at 8:00 am for half an hour