MSDS

MURPHY OIL SOAP LIQUID - ORIGINAL
This industrial Material Safety Data Sheet is not intended for consumers and does not address consumer use of the
product. For information regarding consumer applications of this product, refer to the product label.
Version 0.0
Revision Date 00/00/0000
Print Date 10/09/2012
3 / 7
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions
:
Use personal protection recommended in Section 8 of the
MSDS.
Methods for containment /
Methods for cleaning up
:
Cover with inert, absorbent material and remove to disposal
container. Spill area may be slippery. Flush with plenty of
water.
SECTION 7. HANDLING AND STORAGE
Storage
Requirements for storage
areas and containers
:
Store at controlled room temperature at 20-25°C (68-77°F).
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Components with workplace control parameters
Chemical
Name
CAS-
No.
Value
Exposure
Limits
Source
Notes
SODIUM
HYDROXIDE
1310-73-
2
Ceiling
2 mg/m3
ACGIH
Ceil_Ti
me
2 mg/m3
NIOSH/GUIDE
PEL
2 mg/m3
OSHA_TRANS
Ceiling
2 mg/m3
Z1A
Engineering Controls
:
In an industrial work environment, no special precautions or
control measures are required.
Personal protective equipment
Protective measures
:
In an industrial work environment, if a splash is likely,
chemical goggles may be needed. Prolonged skin contact
may require protective gloves. For consumer use, no unusual
precautions are necessary.