User Guide

Using the Postscript, PCL and XPS Printer Driver 5-9
" To display a list of jobs saved with a [Job Retention] setting, press
[USB/HDD] in the home screen, and then press [Proof/Print]. Print the
document by selecting the job in the list.
The password must be entered if one has been specified for the job.
[Layout] Tab
The [Layout] Tab allows you to
 Print several pages of a document on the same page (N in 1 printing)
 Print a single copy for enlargement and print several pages (PCL printer
driver only)
 Rotate the print image 180 degrees
 Specify whether or not blank pages are printed (PCL and XPS printer
driver only)
 Specify duplex (double-sided) printing
 Specify booklet printing
 Specify binding position
 Adjust the binding margin
 Specify the position on the paper where the document is to be printed
(PCL printer driver only)
[Cover Mode] Tab
The [Cover Mode] Tab allows you to
 Print front and back cover pages and separator pages
 Specify the tray that contains the paper for the front and back cover pages
and separator pages
[Stamp/Composition] Tab
" Be sure to use overlays with print jobs with a paper size and orienta-
tion that matches the overlay form.
In addition, if settings have been specified for [N in 1] or [Booklet] in
the printer driver, the overlay form cannot be adjusted to match the
specified settings.
The settings in the Watermark function of the [Stamp/Composition] tab allows
you to
 Select the watermark to be used
 Create, edit or delete watermarks
 Adjust the watermark position