Installation manual

14
8 Confirm the displayed contents and click [Weiter].
9 Click [Fertig stellen] to close the screen appears.
10 After installing the driver, you can connect the USB cable.
Go to the “Connecting a USB cable,” below.
q Connecting a USB cable
WICHTIG
Make sure that you followed installation steps 1 to 10 described on “Install the driver” on
pages 12 to 14.
1 Plug the USB cable to your machine and then connect it to your computer.
Connect
Hinweis
Be sure to use a shielded USB cable. Use of an unshielded cable may result in
radio interference.
2 Turn your machine on.