Installation manual

11
10. Initial setup
q Memory initialize
1 Press <Setting>, <7>, <2>, <5>, [Enter] to initialize the memory.
2 When the confirmation message appears, press [Yes].
q Set the basic settings
1 Press <Setting>, <9>, [Enter].
Ben.-Inst. 1/3
Sprache:Deutsch
Akt. Zeit:2007 04/02 13:30
Sommerzeit:Off
Schl. Eingabe
2 Use the cursor key to select the item and press [Enter].
After adjusting the setting press [Enter] to save it.
You can set the following items.
Items Descriptions
Sprache Select the language.
Akt. Zeit Enter current date and time.
Sommerzeit Select the validity for the daylight saving time.
Empfangsmodus Select the fax reception mode that best matches the
machine usage.
Wählton-Erfass. Select whether to detect the dial tone before dialing or not.
This will normally be set to "OFF".
TTI-Eing./-Bearb. Enter the name (or company name) to be shown at the top
of the faxes sent from your machine. Up to three TTIs can
be registered.
Standard-TTI Select the TTI that will be used most often.
TTI-Nr. Enter the fax number of the machine.
3 When you finished all of settings, press [Close] to return to the standby mode.
Hinweis
For details on how to input characters, see the "Entering characters" on chapter 1 of the
User's Guide.