Installation manual

10
9. Turn off the transport mode
WICHTIG
Before turn off the transport mode, unlock the scanner locking (see “Unlock the scan-
ner” on page 9).
1 When the machine is turned on, the display shows the following message:
Spiegel verriegelung
2 Press <Setting>, < >, <1>, <4>.
3 Select “OFF” and press [Enter].
Abbruch Eingabe
Spiegel verriegelung
Off
On
4 The following message will appear when a new drum cartridge is installed.
Press [Yes]
Neue Trommel erfasst
Neue Trommel erfasst
Verwendung?
Ja Nein
5 The machine asks you to print the instruction sheet of printing margin adjustment.
If necessary, press [Yes] to print it, then adjust the printing margin by following the
instructions described on the printed sheet. (Make sure that printing margin is 3
mm at both top and left side.)
Druck-Pos. überprüfen
Soll gedruckt werden?
Ja Nein